Universal Solvents
A premium cast-in circulation heater with an array of special features to safely heat volatile solvents.
APPLICATIONS:
- Wafer Cleaning & Rinsing (Wet Bench Systems)
- Heating of Flow-Flashpoint Solvents & Acids
- For Use with Single Pass or Recirculating Systems
- Similar Uses as PFA-Tube Heaters, but Higher Temp Limits
- Processes Involving Explosive Vapors
- Situations where Exact Temperature Control is Critical
FEATURES & BENEFITS:
- Fluid Path has No Contact with Heating Elements
- Allows for Safe Heating of Low Flashpoint Solvents
- Heated Media is Isolated in Seamless 316 Stainless Steel Tubes
- Solvent Tubes are Passivated and Electro-Polished for Purity
- Self-Draining Flow-Tubes Eliminate Trapped Debris
- Cooling Tube Quick Reduces Heat Below Flashpoint
- NEMA 7 Explosion-Proof Electrical Enclosure
- Equipped with Robust Sensor & Switch Array
SPECIFICATIONS:
Power:
- 6 kW Total to 8 kW Total
- Voltage Range: 208 - 480 V
- Max Line Current: 30 A per circuit
Tubing (Solvent Tube):
- .750” OD (3/4") (19.1 mm)
- .065” Wall (1.7 mm)
- Overall Process Tube Length: 115.5” (2934 mm)
- 316L Stainless Steel, Passivated & Electro-Polished
- Max Pressure: 3300 psi (227 bar)
Tubing (Cooling Tube):
- .250” OD (1/4") (6.3 mm)
- .035” Wall (0.9 mm)
- Overall Process Tube Length: 86.25” (2190 mm)
- 316L Stainless Steel
- Max Pressure: 5100 psi (351 bar)
Enclosure:
- NEMA 7 (explosion-proof)
(Class 1, Div. 1 and 2, Groups B, C and D)
Max Working Temperature:
- 392°F (200°C)
- Published temperatures are for housing at 12 o’clock position;
Higher temps may be possible at 6 o’clock position. See factory for details.
Sensors:
- Two J-Type Thermocouples (cast in)
- One J-Type Thermocouple (removable)
- Snap Action High Limit Switch (with auto reset)
Fittings:
- Solvent Tube: Flaretek®-Compatible or Swagelok® VCR
- Cooling Tube: NPT or Swagelok® VCR
Available Accessories:
- Insulating Jackets
- Compression Fittings
Download the
Universal Solvent Heater
Technical Brochure
Temperature and Pressure Charts
Universal Solvent Heater, No Fittings
Universal Solvent Heater, No Fittings
Universal Solvent Heater, No Fittings
Dimensional Drawings
Two Single-Phase Circuits
Three-Phase Wye Circuit
Wiring Diagrams
Universal Solvent Heater w/ Insulating Jacket
Univ. Solvent Heater w/ VCR Fittings
Univ. Solvent Heater w/ Flaretek Fittings
Universal Solvent Heater Important Features
Detailed Images
Universal Solvent Heater Part Numbering System
Building a Universal Solvent Heater Part Number:
Use the tables below to build each section of your Universal Solvent Heater. After assigning letters/numbers for each applicable section, you will have a complete part number, ready to quote.
For assistance, contact CAS directly.
